Peristaltic pump iPump4S-M, drive IP54 variableup to 400 RPM

The picture may be different from the article and can include supply, which is not in the standard scope.

 

The iPump4S-M peristaltic pump was built as a pump for rough use with changing pump rates. The drive can be combined with different pump heads for up to 2 channels. The motor speed can be adjusted in the range of 0.1 up to 400 RPM. Depending on the pump head and tubing, flow rates of 0.0001-1710 ml/min are possible with this pump. In addition to the pump speed, the running time of the pump can also be adjusted. The set values can be adjusted via a membrane keypad, via the RS485 interface or via the analogue interface. The hose line can be filled quickly via a prime button.

The current number of revolutions is shown in an easy-to-read LED display. The last set parameters are saved by the pump even when it is switched off. The metal housing is easy to clean and offers IP 54 protection against penetrating splash water and dust.

Flow rate: 0.0001- 1710 ml/min
Speed: 0.1-400 RPM
Accuracy: 1 UPM
Pump direction: Forward
Time control: 0,1s-99 h
Display: 3 digit speed display
Interface: RS-485
External signals: Start/stop, speed 0-5V, 0-10V, 4-20 mA, 0-10kHz
Ambient temperature: 0-40°C
Humidity: <80% RH
Size: 285×207×180 mm (d*w*h)

Scope of delivery:
Pump drive without head