Thermostat with 2 l bath volume, MyFerm

Thermostat with 2 l bath volume, MyFerm
The picture may be different from the article and can include supply, which is not in the standard scope.
Literature: (-)
  • (Click here for more information)
  • pdf_preview
  • pdf_preview
 
Order-No.: 886710040 2.732,40 € for 1 piece plus VAT (19%) plus shipping costs
For temperature control of MyFerm bioreactors.

Temperature range: 20..200 °C (with water cooling).
Heating capacity: 2 kW
Temperature constancy: +/- 0.02 °C

Pressure pump:
max. delivery rate: 27 l/min
max. delivery pressure: 0.7 bar
Suction pump:
max. delivery rate: 22 l/min
max. delivery pressure: 0.4 bar

Dimensions: 178 x 260 x 355;
Mains connection: 230V 1~N 50Hz

Optionally, the connection of an external temperature sensor is recommended for precise temperature monitoring and control in the bioreactor.
more
(-) Technical data:
Nominal volume: 2 l
Maximum volume to be transported: 27 l/min
Height of workspace: 190 mm
Depth of the workspace: 150 mm
Width: 178 mm
Depth: 260 mm
Height: 355 mm
(-) Compliance information:
WEEE obligation: Yes
WEEE registration number: DE87387371
WEEE brand according to EAR register: HLL
WEEE type of equipment: Small equipment for use in other than private households only

Necessary additional article of:

  • 106722010
    Beaker, tempered, 100 ml, h. F.
  • 106722011
    Beaker tempered 100 ml, n. F.
  • 106722015
    Beaker tempered, 150 ml
  • 106722016
    Beaker tempered 150 ml, n. F.
  • 106722025
    Beaker, tempered, 250 ml, h. F.
  • 106722026
    Beaker tempered 250 ml, n. F.
  • 106722050
    Beaker, tempered, 500 ml, h. F.
  • 106722051
    Beaker tempered 500 ml, n. F.
  • 106722080
    Beaker tempered 800 ml, h. F.
  • 106722081
    Beaker tempered 800 ml, n. F.
  • 106722100
    Beaker, tempered, 1000 ml, h. F.
  • 106722101
    Beaker tempered 1000 ml, n. F.
  • 106722200
    Beaker tempered 2000 ml, h. F.
  • 106722201
    Beaker tempered 2000 ml, n. F.
  • L1402441
    Heat exchanger with stirring feed-through for bioreactors MyFerm IV 2-5 litres
  • L1402442
    Heat exchanger without stirring bushing for bioreactors MyFerm III 2-5 litres
  • L1402443
    Heat exchanger without stirring bushing for bioreactors MyFerm III 10-15 litres
  • L1402444
    Heat exchanger without stirring bushing for bioreactors MyFerm III 15-20 litres
  • L505668
    Temperature Control Unit Clean Save Jacket 5000
  • L576260002
    Double-walled round bottom flask, temperature-controlled, 250 ml (up to 2000 ml on request)
  • L576260006Z
    Double-walled two-neck round-bottom flask,temperature-controlled,250 ml (up to 2000 ml on request)
  • SON0500011
    Stainless Steel Temperature-Control Jacket for 100 ml DWK/DURAN Laboratory Bottles   The SON0500011 is part of the innovative modular SON05000 temperature-control system, designed for the flexible and controlled temperature regulation of laboratory and reaction vessels. The temperature-control jacket enables controlled temperature regulation of a 100 ml DWK/DURAN laboratory bottle within a temperature range of -20 to +200 °C. The laboratory vessel used remains interchangeable and is enclosed by a double-walled temperature-control jacket made of V2A stainless steel, material 1.4301. The temperature-control fluid from an external circulating thermostat is routed through the double jacket. The sample and the temperature-control medium do not come into direct contact. The standard version features an open bottom and is suitable for use on a magnetic stirrer. The vessel can be stirred during temperature control; continuous mixing supports a more uniform temperature distribution. As standard, the temperature-control jacket is equipped with two fixed hose connectors / olive fittings, Ø 12 mm, for the supply and return of the temperature-control fluid. Threaded connections are available as an option. Applications / Benefits controlled temperature regulation of reactions and samples easy replacement of laboratory and reaction vessels suitable for use in laboratories and production environments modular and expandable temperature-control system can be combined with a magnetic stirrer Technical Data Vessel volume: 100 ml Inner diameter: approx. 57 mm Temperature-controlled height: approx. 48 mm Material: V2A stainless steel, material 1.4301 Temperature range: -20 to +200 °C Design: double-walled, open bottom Connections: 2 fixed hose connectors / olive fittings, Ø 12 mm Suitable for magnetic stirrers: yes Compatible Options SON05000I1 – additional insulation for 50–400 ml SON05000B1 – temperature-controlled bottom for 50–400 ml optional threaded connections instead of hose connectors / olive fittings Additional insulation is recommended for applications at temperatures below 15 °C or above 50 °C. The temperature-controlled bottom provides additional temperature regulation of the vessel from below. A magnetic stirrer can also be used with this version. Without a vessel inserted, the version with a temperature-controlled bottom can also be used as a compact temperature-control bath. Insulation and the temperature-controlled bottom are design options and must be ordered together with the temperature-control jacket; retrofitting is not intended.   Required for Operation A suitable external circulating thermostat with an appropriate hose set is required for temperature control. For applications requiring simultaneous mixing, a magnetic stirrer can also be used.   Suitable Accessories Suitable circulating thermostats, magnetic stirrers and hose sets can be found in our selection of accessories and equipment.   Note on Dimensions The stated dimensions are approximate values. Dimensional tolerances of the laboratory bottles used are taken into account during the design process. The final fit will be checked when processing the order based on the intended vessel or the current vessel drawing.   A product brochure is available in German and English.
  • SON0500012
    Stainless steel temperature-control jacket for 250ml DWK/DURAN laboratory bottle
  • SON0500014
    Stainless Steel Temperature-Control Jacket for 500 ml DWK/DURAN Laboratory Bottl
  • SON0500015
    Stainless Steel Temperature-Control Jacket for 1000 ml DWK/DURAN Laboratory Bott
  • SON0500016
    Stainless Steel Temperature-Control Jacket for 2000 ml DWK/DURAN Laboratory Bott
  • SON0500017
    Stainless Steel Temperature-Control Jacket for 3500 ml DWK/DURAN Laboratory Bott
  • SON0500018
    Stainless Steel Temperature-Control Jacket for 5000 ml DWK/DURAN Laboratory Bott
  • SON0500020
    Tempering coat / incubation coat made of stainless steel for 50 ml beaker
  • SON0500021
    Tempering coat / incubation coat made of stainless steel for 150 ml beaker
  • SON0500022
    Tempering coat / incubation coat made of stainless steel for 250 ml beaker
  • SON0500023
    Tempering coat / incubation coat made of stainless steel for 400 ml beaker
  • SON0500024
    Tempering coat / incubation coat made of stainless steel for 600 ml beaker
  • SON0500025
    Tempering coat / incubation coat made of stainless steel for 800 ml beaker
  • SON0500026
    Tempering coat / incubation coat made of stainless steel for 1000 ml beaker

 

Accessories:

  • 106722010
    Beaker, tempered, 100 ml, h. F.
  • 106722011
    Beaker tempered 100 ml, n. F.
  • 106722015
    Beaker tempered, 150 ml
  • 106722016
    Beaker tempered 150 ml, n. F.
  • 106722025
    Beaker, tempered, 250 ml, h. F.
  • 106722026
    Beaker tempered 250 ml, n. F.
  • 106722050
    Beaker, tempered, 500 ml, h. F.
  • 106722051
    Beaker tempered 500 ml, n. F.
  • 106722080
    Beaker tempered 800 ml, h. F.
  • 106722081
    Beaker tempered 800 ml, n. F.
  • 886710040S
    Temperature control for bioreactors MyFerm / programme extension
  • L14020922
    Temperature sensor Pt-100 for MyFerm 2l
  • L14020923
    Temperature sensor Pt-100 for MyFerm 5+10l
  • L14020924
    Temperature sensor Pt-100 for MyFerm 20 l Lemo plug
  • L505668
    Temperature Control Unit Clean Save Jacket 5000
  • SON0500011
    Stainless Steel Temperature-Control Jacket for 100 ml DWK/DURAN Laboratory Bottles   The SON0500011 is part of the innovative modular SON05000 temperature-control system, designed for the flexible and controlled temperature regulation of laboratory and reaction vessels. The temperature-control jacket enables controlled temperature regulation of a 100 ml DWK/DURAN laboratory bottle within a temperature range of -20 to +200 °C. The laboratory vessel used remains interchangeable and is enclosed by a double-walled temperature-control jacket made of V2A stainless steel, material 1.4301. The temperature-control fluid from an external circulating thermostat is routed through the double jacket. The sample and the temperature-control medium do not come into direct contact. The standard version features an open bottom and is suitable for use on a magnetic stirrer. The vessel can be stirred during temperature control; continuous mixing supports a more uniform temperature distribution. As standard, the temperature-control jacket is equipped with two fixed hose connectors / olive fittings, Ø 12 mm, for the supply and return of the temperature-control fluid. Threaded connections are available as an option. Applications / Benefits controlled temperature regulation of reactions and samples easy replacement of laboratory and reaction vessels suitable for use in laboratories and production environments modular and expandable temperature-control system can be combined with a magnetic stirrer Technical Data Vessel volume: 100 ml Inner diameter: approx. 57 mm Temperature-controlled height: approx. 48 mm Material: V2A stainless steel, material 1.4301 Temperature range: -20 to +200 °C Design: double-walled, open bottom Connections: 2 fixed hose connectors / olive fittings, Ø 12 mm Suitable for magnetic stirrers: yes Compatible Options SON05000I1 – additional insulation for 50–400 ml SON05000B1 – temperature-controlled bottom for 50–400 ml optional threaded connections instead of hose connectors / olive fittings Additional insulation is recommended for applications at temperatures below 15 °C or above 50 °C. The temperature-controlled bottom provides additional temperature regulation of the vessel from below. A magnetic stirrer can also be used with this version. Without a vessel inserted, the version with a temperature-controlled bottom can also be used as a compact temperature-control bath. Insulation and the temperature-controlled bottom are design options and must be ordered together with the temperature-control jacket; retrofitting is not intended.   Required for Operation A suitable external circulating thermostat with an appropriate hose set is required for temperature control. For applications requiring simultaneous mixing, a magnetic stirrer can also be used.   Suitable Accessories Suitable circulating thermostats, magnetic stirrers and hose sets can be found in our selection of accessories and equipment.   Note on Dimensions The stated dimensions are approximate values. Dimensional tolerances of the laboratory bottles used are taken into account during the design process. The final fit will be checked when processing the order based on the intended vessel or the current vessel drawing.   A product brochure is available in German and English.
  • SON0500012
    Stainless steel temperature-control jacket for 250ml DWK/DURAN laboratory bottle
  • SON0500014
    Stainless Steel Temperature-Control Jacket for 500 ml DWK/DURAN Laboratory Bottl
  • SON0500015
    Stainless Steel Temperature-Control Jacket for 1000 ml DWK/DURAN Laboratory Bott
  • SON0500016
    Stainless Steel Temperature-Control Jacket for 2000 ml DWK/DURAN Laboratory Bott
  • SON0500017
    Stainless Steel Temperature-Control Jacket for 3500 ml DWK/DURAN Laboratory Bott
  • SON0500018
    Stainless Steel Temperature-Control Jacket for 5000 ml DWK/DURAN Laboratory Bott
  • SON0500020
    Tempering coat / incubation coat made of stainless steel for 50 ml beaker
  • SON0500021
    Tempering coat / incubation coat made of stainless steel for 150 ml beaker
  • SON0500022
    Tempering coat / incubation coat made of stainless steel for 250 ml beaker
  • SON0500023
    Tempering coat / incubation coat made of stainless steel for 400 ml beaker
  • SON0500024
    Tempering coat / incubation coat made of stainless steel for 600 ml beaker
  • SON0500025
    Tempering coat / incubation coat made of stainless steel for 800 ml beaker
  • SON0500026
    Tempering coat / incubation coat made of stainless steel for 1000 ml beaker
  • SON05492
    Tempering vessel, double-walled, material 1.4301, bottom 2 mm

 

Accessory of:

  • L14020001
    Laboratory reactor My Ferm I, 20 litres , set Complete fermenter with stand
  • L14023010
    Fermentation vessel for bioreactor MyFerm - 10 l
  • L14023020
    Fermentation vessel for bioreactor MyFerm 20 l
  • L50566
    Tempered beaker, various volumes Volume 100,150,250,500,800,1000,2/3/5000 ml
  • SON05492
    Tempering vessel, double-walled, material 1.4301, bottom 2 mm
  • 886720002
    Bioreactor 2 l MyFerm
  • 886720005
    Bioreactor 5 l MyFerm
  • 886720010
    Bioreactor 10 l MyFerm
  • 886720020
    Bioreactor MyFerm 20 l