SONOREX FT 6 frame for foil test
The picture may be different from the article and can include supply, which is not in the standard scope.
For the testing of an ultrasonic cleaner, a foil test (aluminium foil test) according to IEC 886 is recommended at the initial start-up and after an appropriate period of operation regularly (e.g. ¼ annually). The effect of ultrasonic baths is determined by the intensity and the distribution of the cavitation typical for the process in the ultrasonic bath. The foil test is a simple method for displaying the intensity and distribution of cavitation in an ultrasonic cleaner. For this purpose, an inserted aluminium foil is perforated or destroyed to a certain degree by cavitation, depending on the duration.
The foils can be archived in a suitable way (scanning, photo, etc.). The comparison of the foils is thus possible at any time. The perforated or perforated surfaces of the foils should have approximately the same extension and distribution - they are never congruent. Only by means of regular film tests is it possible to check the process, e.g. during the reprocessing of medical devices.
The selection of the film depends on the size of the ultrasonic cleaner. The wire frames are designed for a wide range of bath dimensions. Aluminium household foil is additionally required for the test procedure, this is not included in the scope of delivery. Internal dimensions l × w × d: 220 x 410 x mm
more The foils can be archived in a suitable way (scanning, photo, etc.). The comparison of the foils is thus possible at any time. The perforated or perforated surfaces of the foils should have approximately the same extension and distribution - they are never congruent. Only by means of regular film tests is it possible to check the process, e.g. during the reprocessing of medical devices.
The selection of the film depends on the size of the ultrasonic cleaner. The wire frames are designed for a wide range of bath dimensions. Aluminium household foil is additionally required for the test procedure, this is not included in the scope of delivery. Internal dimensions l × w × d: 220 x 410 x mm
Accessory of:
- 305
SONOREX SUPER Ultraschallbäder RK 156 Ultrasonic bath, 6 liter - 646
SONOREX SUPER Ultraschallbäder RK 156 BH Ultrasonic bath with heating, 9 liter - 3221
SONOREX DIGITEC Ultraschallbäder DT 156 BH Ultrasonic bath with heating, 9 liter - 3275
SONOREX DIGITEC Ultraschallbäder DT 156 Ultrasonic bath, 6 liter - 7181
SONOREX DIGIPLUS Ultraschallbäder DL 156 BH Ultrasonic bath with heating, 9 lite
- Article-No: 3222
- Category: Accessories for ultrasonic devices
Show all Accessories for ultrasonic devices from Bandelin - Validity: 30.06.2024
- Last Update: 19.02.2024