| INCUDRIVE Roller Systems/Incubators, schuett-biotec | |||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
For rotating and rolling of vessels, test tubes or cell culture bottles. With or without temperature control. Doors made of transparent, thermally insulated UV-resistant plastics for permanent monitoring of the experiment. (1) INCUDRIVE D-I Roller drive-unit with incubating hood and air circulation system. For defined slow rotation in lower range of speed or fast rotation for thorough mixing of samples. Suitable for continuous mode with heavy load. For up to 4 individually removable roller inserts. The vertical placement of the roller inserts is predetermined. Alternatively, there may be wire mesh trays to allow for placing various equipments in the same environmental/temperature conditions. Electronic temperature control showing actual and set temperature.
Roller insert each for alternatively bottle sizes (on request). Weight of rolling goods max. 10 kg per roller insert or max. 25 kg per device. Speed: Bottle 120 mm Ø, approx. 0,1 – 2 min-1 Length: Incl. cap max. 520 mm Temperature range: +5°C above room temp. up to +50°C Dimensions outer (W × D × H): 610 × 780 × 920 mm Dimensions inner (W × D × H): 560 × 550 × 740 mm Power: 230 V, 50 Hz, 330 W Weight: approx. 45 kg
(2) INCUDRIVE R Roller system with mounted roller rack, without temperature control. Can be combined with INCUDRIVE H incubating hood. To slowly rotate roller drums. For roller bottles, test tubes or vessels according to sample (accessories). Speed: Drum approx. 0.1 – 2 min-3 Dimensions outer (W × D × H): 650 × 530 × 260 mm Power: 230 V, 50 Hz, 330 W Weight: approx. 15 kg (without drum)
(3) INCUDRIVE R Incubating hood with air-circulation system. Can be combined with e.g. INCUDRIVE R or for incubating equipment and experiments on even surfaces. Soft rubber lining at the bottom for passage of power cords. Temperature range: +5°C above room temp. up to +50°C Dimensions outer (W × D × H): 640 × 555 × 750 mm Dimensions inner (W × D × H): 600 × 460 × 585 mm Power: 230 V, 50 Hz, 280 W Weight: approx. 10.5 kg
(4) INCUDRIVE S Incubator with drive-unit to rotate roller drums. For cell culture bottles, test tubes or vessels according to sample (accessories). Housing container made of stainless steel. The roller rack may be easily removed and inclined. Electronic temperature control showing actual and set temperature.
Temperature range: +70°C Dimensions outer (W × D × H): 895 × 715 × 840 mm Dimensions inner (W × D × H): 554 × 550 × 644 mm Power: 230 V, 50 Hz, 550 W Weight: approx. 110 kg
(5) Motion Systems Incubator with roller system for up to 90 cell culture bottles (9 levels / 5 bottles side by side/ 2 in a row), for the production of e.g. vaccines, using adherent cell cultures. Energy savings. Warm-up period max. 2 hours. For establishing methods, for future scale-up. Improved safety during production, problems during cultivation are limited to the incubator in question. Including RS232-interface for temperature control (Quality Control). May pass any standard laboratory door. Mobile.
Speed: Bottle 120 mm Ø, approx. 0,1 – 2 min-1 Length: Incl. cap max. 270 mm Temperature range: +5°C above room temp. up to +50°C Temperature stability: <± 1°C inside the medium Dimensions outer (W × D × H): 800 × 950 × 1950 mm Power: 230 V, 50 Hz, 1300 W (max.) Weight: approx. 260 kg
Accessories Drums for INCUDRIVE R / INCUDRIVE S
|    | ||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||