Shakers VS 8
LAUDA shakers are available with orbital, reciprocating, rocking or orbital rocking motion. Compact, durable mechanics for reliable continuous operation. Drive system with overload-protected AC motor, guaranteeing constant speed even in continuous duty and independently of the load. Suitable for use in laboratories, incubation and temperature stabilizing rooms at ambient temperatures between +10°C and +50°C (models VS 8 OE and VS 8 BE up to +60°C). Infinitely adjustable electronic speed control. Gentle starting. The devices are maintenance-free and CE marked. Models VS 8 O, VS 8 B, VS 15 / VS 30 microprocessor-controlled: adjustable in steps of 1.0 rpm or 0.5 rpm (VS 15 T and VS 15 R). Housing made of electrolytically galvanized, powder-coated steel sheet. The base plate is made of electrolytically galvanized, powder-coated steel sheet, the shaking platform of anodized aluminium, equipped with four plastic pins for secure attachment of accessory equipment (for nearly all forms of standard laboratory vessels). Model VS 30 O: The base plate is made of electrolytically galvanized steel sheet, with four support rods with screw-type clamps made of stainless steel for secure attachment of accessory equipment. Well arranged control panel for easy operation.
I Models with analog control: VS 8 OE / VS 8 BE Timer switch-selectable between time-limited operation up to 60 minutes and continuous operation. Suitable for use in incubators up to +60°C. II Models with digital control: VS 8 O / VS 8 B / VS 15 / VS 30 Microprocessor-controlled, timer: 1 minute to 99:59 hours or continuous operation. Speed and remaining operating time are indicated by two LC displays. An RS 232 interface for data transmission of measurement and control tasks via PC is optionally available on request. Shakers VS 8 OE / VS 8 O with orbital motion and shakers VS 8 BE / VS 8 B with reciprocating motion High-duty, low-noise and space-saving, equally suitable for gentle liquid motion and for vigorous mixing. In daily use in biology and microbiology laboratories and in diagnostic test reactions, in medical diagnostics or analysis, as well as for growing micro-organisms, cell and tissue cultures. Technical data: | VS 8 OE / VS 8 BE | VS 8 O / VS 8 B | Exterior dimensions (W×D×H): | 350 × 375 × 160 mm | 350 × 355 × 160 mm | Moving platform: | 330 × 330 mm | 330 × 330 mm | Load: | max. 8 kg at even load distribution | Shaking motion: | VS 8 OE: orbital VS 8 BE: reciprocating | VS 8 O: orbital VS 8 B: reciprocating | Timer: | up to 60 minutes or continuous operation | 1 min up to 99:59 h or continuous operation | Shaking amplitude: | VS 8 OE: 10 mm VS 8 BE: 20 mm | VS 8 O: 10 mm VS 8 B: 20 mm | Shaking frequency: | VS 8 OE: 20 – 500 rpm VS 8 BE: 20 – 300 rpm | VS 8 O: 20 – 500 rpm VS 8 B: 20 – 300 rpm | Electrical connection: | 230 V, 50–60 Hz, 65 W | Net/gross weight: | 11/13 kg | 11/13 kg |
Supplied without the illustrated accessories. Other voltage variants on request. Shaker VS 15 T with orbital rocking motion
For gentle and uniform rocking motion, quiet. Applications mainly in AIDS research, for diagnostic tests with test plates or for growing cell cultures and micro-organisms. (Optionally interface RS 232). Technical data: | | Overall dimensions (W×D×H): | 480 × 487 × 160 mm | Moving platform: | 450 × 450 mm | Load: | max. 15 kg at even load distribution | Shaking motion: | three-dimensional, orbital rocking | Timer: | 1 min up to 99:59 hours or continuous operation | Shaking amplitude: | 3 degrees | Shaking frequency: | 2 to 50 rpm | Electrical connection: | 230 V 50/60 Hz, 90 W | Net/gross weight: | 19.5/23.5 kg |
without the illustrated accessories Shaker VS 15 R with rocking motion
For slow and uniform rocking, low noise level. The units create reproducible growth and processing conditions at low speeds for cell cultures and other media. Ideal rising and tumbling of the samples. They have a wide range of applications, e.g. for supply of parallel cultures and cell lines or for staining or discoloration of gels. (3014: optionally with interface RS 232). Technical data: | | Overall dimensions (W×D×H): | 480 × 487 × 160 mm | Moving platform: | 450 × 450 mm | Load: | max. 15 kg at even load distribution | Shaking motion: | rocking | Timer: | 1 min up to 99:59 hours or continuous operation | Rocking amplitude: | 3 degrees | Rocking frequency: | 2 to 50 rpm | Electrical connection: | 230 V (Other voltages on request) | Net/gross weight: | 18/21 kg |
without the illustrated accessories Shaker VS 15 O with orbital motion
For gentle motion and vigorous shaking of liquids, low noise level. Universally applicable. Applications in biochemistry, biotechnology, micorbiology, bacteriology and virology, above all for growing micro-organisms, cell and tissue cultures. (Optionally interface RS 232). Technical data: | | Overall dimensions (W×D×H): | 510 × 625 × 142 mm | Moving platform: | 450 × 450 mm | Load: | max. 15 kg at even load distribution | Shaking motion: | orbital | Timer: | 1 min up to 99:59 hours or continuous operation | Shaking amplitude: | 30 mm | Shaking frequency: | 20 to 300 rpm | Electrical connection: | 230 V 50/60 Hz, 65 W | Net/gross weight: | 19.5/23.5 kg |
without the illustrated accessories Shaker VS 15 B with reciprocating motion
For vigorous and intensive shaking, low noise level. The shaking platform's jerky back-and-forth motion creates high turbulence, thus thoroughly mixing the media, e.g. in the production of suspensions and emulsions. Applications e.g. for medical diagnostics, in foodstuffs or environmental analyses. (Optionally interface RS 232). Technical data: | | Overall dimensions (W×D×H): | 480 × 487 × 160 mm | Moving platform: | 450 × 450 mm | Load: | max. 15 kg at even load distribution | Shaking motion: | reciprocating | Timer: | 1 min up to 99:59 hours or continuous operation | Shaking amplitude: | 30 mm | Shaking frequency: | 20 to 300 rpm | Electrical connection: | 230 V 50/60 Hz, 65 W | Net/ gross weight: | 19.5/23.5 kg |
without the illustrated accessories Shaker VS 30 O with orbital motion
With a large shaking tray for accommodating heavier loads, attractive shaking amplitude and variability. Equally suitable for gentle motion as for vigorous mixing. Low noise level, universally applicable, e.g. for analysis or diagnostics in pharmacy, chemistry or biology, plant cultivation and the food industry. (Optionally interface RS 232). Technical data: | | Overall dimensions (W×D×H): | 705 × 607 × 160 mm | Moving platform: | 676 × 540 mm | Load: | max. 30 kg at even load distribution | Shaking motion: | orbital | Timer: | 1 min up to 99:59 hours or continuous operation | Shaking amplitude: | 32 mm | Shaking frequency: | 20 to 250 rpm, when the rack frame is used 20 to 200 rpm | Electrical connection: | 230 V 50/60 Hz, 90 W | Net/gross weight: | 38/44 kg |
without the illustrated accessories Accessories for shakers
Shaking trays
Made of stainless steel, with holes to accommodate clamps for Erlenmeyer flasks and other accessories (see also shaking incubators page XXX). | Article | Order No. | | Tray type A000044 | 52 11 23950 | | For shakers VS 8, 330 × 330 mm | | (5) | Tray type A000045 | 52 11 23966 | | For shakers VS 15 and shaking incubator VS 60 OI. 450 × 450 mm | | | Tray type A000047 | 52 11 23980 | | For shakers VS 30 O and shaking incubator VS 150 OI, 670 × 537 mm. | |
Made of 3 mm thick, anodized aluminium, with holes to accommodate Erlenmeyer flasks and other accessories. (6) Clamps for Erlenmeyer flasks
Made of stainless steel, for screwing on to trays A000044, A000045 and A000047. Complete with attachment materials (see also shaking incubators page XXX). Number of clamps per tray, see table:
Insertable rack for test tubes
Made of stainless steel, perforated section can be tilted by 90°, with clamping springs for secure grip and silent shaking of glasses; can be screwed on to shaking trays A000044, A000045 and A000047. For shakers VS 8, VS 15 und VS 30 (see also shaking incubators page XXX). Capacity each tray: | Tray A000044: | Type A000059: max. 3 racks Type A000060: max. 2 racks | Tray A000045: | Type A000059: max. 6 racks Type A000060: max. 4 racks | Tray A000047: | Type A000059: max. 9 racks Type A000060: max. 8 racks |
| Article | for | Order No. | (7) | Type A000059 | max. 24 tubes 12 to 17 mm Ø | 52 11 23953 | | Type A000060 | max. 16 tubes 25 to 29 mm Ø | 10 11 03954 |
without the illustrated accessories. (8) Clamps for separating funnels
Made of stainless steel, for screwing on to shaking trays A000044 and A000045. | Type | Separatory funnel vol. ml | Neck width | Clamps | Order No. | | A000054 | 50 | 19 / 26 (ISO / Squibb) | 6 / 111) | 52 11 23957 | | A000055 | 100 | 19 / 26 (ISO / Squibb) | 6 / 111) | 52 11 23958 | | A000056 | 250 | 19 / 26 (ISO / Squibb) | 4 / 81) | 52 11 23959 | | A000057 | 250 | 29 / 32 (Conical form) | 4 / 81) | 10 11 03955 | | A000058 | 500 | 29 / 32 (ISO / Squibb) | 3 / 61) | 52 11 23956 |
1) Max. number of clamps per shaking tray A000044 / A000045 for shakers VS 8 / VS 15. Other clamps on request. Holding frame for a test plate
Made of stainless steel for attachment of a test plate, for screwing on to shaking trays A000044 and A000045. Capacity: A000044 / 4, A00004 / 6 test plates complete with attachment materials. For shaking devices VS 8, VS 15 O and VS 15 B (see also shaking incubators VS 45 OI and VS 60 OI page XXX).
without the illustrated accessories Non-slip rubber mats
For the shaking platform. For slow moving, e.g. nutrient solutions in petri dishes and flasks (see also shaking incubator VS 60 OI page XXX). | Article | Order No. | | Type A000042 | 52 11 23951 | | 300 × 300 mm, for shakers VS 8 | | (10) | Type A000043 | 52 11 23965 | | 420 × 420 mm, for shakers VS 15 and shaking incubator VS 60 OI | |
Universal mounts
For secure attachment of various shaking objects (see also shaking incubator VS 60 OI page XXX). | Article | Order No. | | Universal mount A000048 | 52 11 23952 | | For shakers VS 8. With 4 rubber-coated bars. | | (11) | Universal mount A000049 | 52 11 23967 | | For shakers VS 15 and shaking incubator VS 60 OI. With 6 rubber-coated bars. | | | Universal mount A000050 | 52 11 23982 | | For shakers VS 30. Consists of 2 longitudinal bars and 6 transverse bars. Screw-type clamps are used for adjusting the longitudinal bars vertically and the transverse bars horizontally. | |
Platform frame
With 4 levels, with top rims, three levels removable. Frame and trays made of stainless steel. Distance between trays- 60 mm. Grooved rubber mats on trays to ensure secure grip of objects. Only for shaking devices VS 15 T and VS 15 R.
Adhesive mat, black
Highly adhesive special mat for easy fastening of a wide range of different vessels on tray or shaker table, shaking speed up to approx. 250 rpm (depending on shape and weight of the vessel and size of the shaking amplitude). - Size: 200 × 200 mm, can be cut to size with scissors.
- Temperature range: 15 to 60°C.
For shakers VS 30 O: can only be used in connection with tray type A000047. Also see LAUDA shaker incubators page XXX. | Article | Type | Order No. | (13) | Adhesive mat, black | A000041 | 10 11 03949 |
|