Hot Plates made of CERAN 500®, Gestigkeit

High-duty hot plates made of CERAN®with thermostatic temperature control from +50 to 500°C
CERAN® - an extraordinary glass ceramic which is extremely resistant to breakage and changes of temperature, will not distort, infrared transmitting and also hight acid-resistant. Its popularity as a material for hot plates in increasing continually.

Features:
The low-mass plate is electrically heated over its full surface, and is embedded into a high-grade, stainless steel frame which is mounted on an internally insulated stainless steel housing. The housing is 5 mm bigger all-round than the Ceran plate. Four feet, which can be individually adjusted to an approximate height of 8 mm, ensure wobble-free standing. The overall height when the feet are screwed right in amounts to 98 mm. Types 4 A and 4 SR are equipped with additional sockets for 4 screw-in retort rods with a diameter of 12 mm.

The entire temperature control system is accommodated in a sealed pressure-cast aluminium case with IP 65 protection. The temperature is set on a °C temperature scale from +50 to 500°C and remains constant automatically. Very good control accuracy, e.g. ± 4°C at 100°C to ±2°C at up to 300°C an more, are achieved thanks to the low-mass heating system and fast responding temperature sensor. These small differences are hardly notable in the heated material. Heat up times are very short, e.g. just 8 minutes to 500°C.


Series A - Bench-top units with attached control case

Type

Platform size
mm
Wght
kg
P rating
W
Voltage
V
Order No.
(1)4 A430×140 5150023043 06 05004
11 A280×280 5.5200023043 06 05011
(2)22 A280×430 7300023043 06 05022
33 A430×430 944003×40043 06 05033
44 A430×58011.557003×40043 06 05044



Series SR - Units with a separate control case for wall mounting
TypePlatform size
mm
Wght
kg
P rating
W
Voltage
V
Order No.
4 SR430×140 5150023043 06 05204
11 SR280×280 5.5200023043 06 05211
(3)22 SR280×430 7300023043 06 05222
33 SR430×430 944003×40043 06 05233
44 SR430×58011.557003×40043 06 05244



The standard length of the cable between the control case and the heater is 1.3 m. Each additional 0.5 m incurs an extra charge equal to 1% of the unit's price. Please quote required cable length when ordering.


(4) Series EB-C - Flush-mounting units for installing in benches
TypePlatform size
mm
Heating area
mm
Height approx.
mm
P rating
W
Voltage
V
Order No.
11 EB-C350×350260×260120200023010 06 05311
22 EB-C500×350410×260120300023010 06 05322
33 EB-C500×500410×41012044003×40010 06 05333
44 EB-C650×500560×41012057003×40010 06 05344



Hot plate as flush-mounting unit for installing in benches. Separate controller case for installing behind the bench frame. The standard length of the cable between the hot plate and the controller case is 0.65 m. For more technical specifications go to www.gestigkeit.de.

vgkl_img

vgkl_img

vgkl_img

vgkl_img